How does water level of toilet float ball valve adjust, how is toilet float ball valve broken to change? Is a lot of users do not understand, so lead to the toilet float ball valve problems, do not know how to repair, want to replace the new and do not know how much money, the following small make up to give everyone to introduce in detail.
A, how does water level of toilet float ball valve adjust
1, want to reduce the water level of the toilet float valve need to put an appropriate amount of empty water bottle, method in a fixed position can reduce the water level of the water tank.
2. The regulating rod can adjust the water level of the water tank. If the adjusting rod is rotated counterclockwise, the water level will fall naturally, and on the contrary, if the adjusting rod is rotated clockwise, the water level in the water tank will rise.
Two, toilet float ball valve is broken how to change
1, the toilet float ball valve is broken, need to close the water source of the toilet first. Some of the toilets will have a triangle valve installed, at which point you need to close the triangle valve. If the triangle valve is not closed, the main valve needs to be closed.
2, remove the toilet float valve plunger, so that you can see the O-ring seal, and two gaskets. If these parts are damaged, water will flow out continuously. If these faults occur, just replace the parts.
3. Find the joint nut and sliding nut under the toilet tank, unscrew the two nuts from the bottom of the tank, then remove the inlet pipe of the toilet and clamp the locknut with a torch bag. In the upper tank of the sliding nut, clamp the base of the floating ball valve of the toilet with another wrench.
4, the toilet tank under the locknut screw off, you can remove the toilet float valve, if the nut is too firm to remove, you need to use oil.
Post time: Dec-16-2020
