Installation method of solar heater valve
1. Take a section of plastic tube or plastic rope, and hang a heavy object at the lower end. The length of the material is slightly larger than the depth of water to be controlled. It is used to automatically control the water supply of a single water tank. When the water is lower than the lower limit, it will automatically supply water, and it will automatically stop when the water is full.
2. According to the wiring diagram: power supply, relay, bottom line, water level 1, water level 2, water level 3, water level 4, and water level 5 in sequence. The water supply button can be manually controlled, and the temporary water replenishment action can be manually controlled, which is convenient for debugging and adjustment.
3. When fixing the sensor probe, keep a distance of about 1cm between the sensor head and the plastic pipe to avoid water marks on the surface of the plastic pipe, which will affect the accurate detection of the signal and cause malfunction. It is used for the water shortage protection function to prevent the absence of water supply. Cause damage to the water pump idling. The anti-dry protection function prevents the water tank from burning due to lack of water and effectively protects heating equipment such as electric heaters.
Hope it helps you
Post time: Jan-06-2022
